72
Maintenance
Attaching ele-
ments
Screwing bolts
tighter
All bolts and nuts must be checked and screwed tighter:
• after the first 8 working hours
• depending on the usage frequency of the machine
• at least once per season
Special torques
Take care of the special torques for the following screwed joints:
• 220 Nm all main frame bolts
All main frame bolts must be checked and screwed tighter:
• after one working hour
• every week
• 220 Nm wheel nuts
Check and screw tighter the wheel nuts:
• after the first 8 working hours
• every week
• after every tyre / wheel renewal
220 Nm
220 Nm
To Next Page