36
Preparation for use
Preparat ion for use
Safety
Obey safety instructions
Obey the safety instructions at the execution of all work. Ignoring the
safety instructions can lead to serious or deadly injuries.
Guarantee correct hydraulic coupling
Check before using if all hydraulic couplings are coupled correct to the
single and double acting valves. Not correct coupled hydraulic cou-
plings can cause unpredictable movements of the machine.
Never work on the machine while it is running
Never carry out adjustment work while the machine is running.
• The tractor engine must be switched off and the ignition key must
be removed
• The electronic control box must be switched off
In case of negligence, serious or deadly injuries can occur.
No persons in turning area
During work, no persons may be within the turning area of the ma-
chine, including the satellite area. Serious personal injuries can be
caused.
Secure the machine
During adjustment, an increased danger of injury exists. Therefore
• secure the machine from accidental commencement of operations
and rolling away
• the machine must have a level, secure position and must be sup-
ported during working if necessary
Unsecured or not supported machines can lead to accidents.
Wear safety shoes
During all work at the machine never bring your feet under the ma-
chine and always wear safety shoes. Wearing safety shoes prevents
or decreases the risk of serious injuries.
Guarantee correct hydraulic coupling
Check definitely, before using the machine, if the hydraulics for the
system are coupled to the correct single acting valves with pressure-
less return. Not correct coupled hydraulic hoses can cause accidental
movements of the machine.
The following preparations have to be done:
• table roller adjustment
• support rollers adjustment
• pre-stretcher adjustment
• film installation
• film overlap
To Next Page
Loading...