48
Use at the field
Film wrap recom-
mendations
The number of table laps decides how many film layers the bale is
wrapped with. It is recommended that a minimum 6 layers of film are
applied to the bale. It may be necessary to increase the number of lay-
ers if the bale has hard and stemmy material.
> Count the number of the table revolutions to cover the bale com-
pletely with film
> Add 1 to this number
> Multiply this with 3, for 6 layers
or
> multiply this with 4, for 8 layers
The table drive is set to give 2+2+2... layers overlap, using 750 mm
film.
Recommendation
500 mm film
The recommended number of film wraps must be 6 film wraps.
Recommendation
750 mm film
The recommended number of film wraps must be 6 film wraps.
Bale diameter (cm) 4 layers 6 layers
120 24 36
150 30 45
Bale diameter (cm) 4 layers 6 layers
120 16 24
150 20 30
To Next Page
Loading...