34
Hitching the machine
Hydraulic block -
open centre
The machine is standardly adjusted for tractors with an open centre
hydraulic system.
No adjustment of the hydraulic block is necessary.
Hydraulic block -
closed centre
When the tractor is provided with a closed centre hydraulic system,
the hydraulic block must be adjusted accordingly.
Cable control
When the machine is provided with a cable control the hydraulic block
must be adjusted accordingly.
> Switch off the tractor engine and remove the ignition key
> Mount the blocking plug
Electronic control
When the machine is provided with an electronic control the hydraulic
block must be adjusted accordingly.
> Switch off the tractor engine and remove the ignition key
> Remove the main plug
> Mount the blocking bolt
> Mount the main plug
Blocking plug
Main plug
Main plug
Blocking bolt
To Next Page
Loading...