TAC 2112 - Page 64

TAC 2112, Manual Index
Index: 2(4), 0-004-7459-3 (GB) TAC AB, 1999-08-01
L
leap years 7:18
M
M rail 5:7
manual control
description 7:21
indication 3:3
operating cycle 7:3
setting operating cycle 4:5
memory backup 7:20
morning boost 7:14
morning heating
morning boost 7:14
with reference sensor 7:14
without reference sensor 7:14
N
night setback
does not take place 6:2
fixed 7:2
forced 7:2, 7:17
setting 4:2
sliding 7:13
weekend/holiday period 4:3
weekly program 4:3, 7:19
O
operating cycle
can be changed by 7:3
setting 4:5
operating cycles
description 7:1
priorities 7:3
operator's panel
buttons 3:6
display window 3:1
using 3:1
optimised starting see morning heating
optimised stop 7:16
outdoor sensor
assembly 5:5
outdoor sensor from another regulator 5:9
outdoor temperature
damped 7:4
description 7:4
frost protection 7:12
pump stop limit 7:12
reading off 4:1
sensor assembly 5:5
sensor setting 5:9
outputs
indication 3:5
K2 7:13
K3 7:19
K4 7:19
manual control 7:21
technical data 8:1
testing 5:9
P
P No. a:1
parameters a:1
power cut 7:20
power supply 8:2
pump
alarm 4:5
control 7:11
frost protection 7:12
manual control 7:21
pump exercise 7:12
pump stop 7:12
restarting 7:12
R
read off temperatures 4:1
reduced daytime operation 7:16
reference sensor
assembly 5:5
configuration 5:9
function with 7:7, 7:8, 7:9, 7:11, 7:14, 7:16
function without 7:6, 7:8, 7:11, 7:14
installations with 2:2
referencesensor
regulationfunction 7:4
resetting 5:9
restarting 5:9
return temperature
heating
limitation 7:10
limitation regulator 7:10
sensor assembly 5:5
returntemperature
heating
readingoff 4:1
room temperature
calculated setpoint 4:1
reading off 4:1
regulator 7:9
sensor assembly 5:5
setting
setpoint, day 4:2
setpoint, night 4:2
too high 6:1
too low 6:1