TAC 2112, Manual Installation
TAC AB, 1999-08-01 0-004-7459-3 (GB), 5:1(10)
5 Installation
5.1 Assembly
Controller
Position the controller so that it is easy to read off and set values and
so that the cover can be opened.
The permissible ambient temperature range and humidity range must
not be exceeded (see Technical data, chapter 8).
The controller is enclosed in a plastic box comprising four parts:
• Transparent cover
• Electronic part
• Backplate with terminal block
• Metal Brace
The backplate must be removed from the electronic part in order to
gain access to the terminal blocks. There is a modular jack on the
electronic part for connecting the information tool Inta2000.
!
WARNING!
Check that the terminal blocks are not
connected to the mains before removing the backplate.
To Next Page
Loading...
