Tait TP9400 Series P25 User Manual

Glossary 163
V
valid signal A valid signal is a signal that the radio
responds to by unmuting the receiver.
A
signal may be valid, for example,
when it is stronger than a minimum level
or has special signaling that matches
the signaling programmed for the
receiving radio.

Tait TP9400 Series P25 Specifications

General

P25 Phase	Phase 1 and Phase 2
Frequency Bands	VHF: 136-174 MHz, UHF: 380-520 MHz, 700/800 MHz: 764-870 MHz
Operating Temperature	-30°C to +60°C (-22°F to +140°F)
Operating Voltage	7.4V DC (Nominal)
MIL-STD	MIL-STD-810 C/D/E/F/G
Battery Life	Up to 12 hours (depending on usage)