1-18
Changing procedure of the frame
2.
Attach the hook cover (4) using the screw (3).
3.Detaching of cap frame guide (TEJTII-C/TEMX-C)
1.
Loosen the screw (5).
2.
After detaching the cap frame guide (6), tighten the screw (5).
Proceed to the next work.
You may let the cap frame guide (6) remain as it is.
However, if has a trouble for embroidery works, detach it.
Turn ON the power switch, or release sleep mode (p.1-19) and after
LX03
To Next Page
Loading...
