TAJIMA TEMX-C - Tubular Goods Frame Adjustment

Adjustment of each part
3-5
3
3.Tubular goods frame
1. Position adjustment of frame presser spring
Move the tubular goods frame (1) back and forth and perform adjustment if there is a play.
1. Loosen the screw (2) and push the tubular goods frame arm (3) to touch the pawl (4).
The shape of the tubular goods frame arm differs depending on type of frame.
2. Push the positioning plate (5) to touch the tubular goods frame arm (3). Additionally, tighten the screw (2) in the state of fit-
ting the presser spring (6) into the groove (7) of the arm.
1
3
2
7
4
6
5
KY02