127
MAINTENANCE
When Required
¡¡
¡¡
¡Side cutter
Installation
1. Insert the bolts from the inner of the bucket
and tighten the nuts.
Tightening torque: 241 N·m (178 ft-lb)
2. Caulk the bolts with a punch at three spots
along the periphery of the screw to prevent
the nuts from coming loose.
Inspecting and Replenishing
the Windshield Washer Fluid
Use a windshield washer fluid designed
specifically for motor vehicles. Follow the
instructions including with the washer fluid.
Inspection
1. Open the engine hood.
2. Inspect the washer tank (1) and add
washer fluid if the level is low.
Replenishment
1. Mix the washer fluid to the prescribed
concentration.
2. Remove the cap (2) and add washer fluid.
3. Reinstall the cap (2).
G4G026
2
1
G4G030
To Next Page
Loading...
Need help?
General
