142
TROUBLESHOOTING
Other Symptoms
For symptoms not included on the table below or if the problem persists after the proper
procedures have been taken, consult a Takeuchi sales or service outlet.
Symptom Main cause Procedure
Left and right operating
levers do not move
smoothly
¡Insufficient grease on left
and right operating levers
¡Add grease.
Refer to page 129.
Travel levers, blade
lever or pedal do not
move smoothly
¡Safety lock lever is raised
¡Fuse is blown
¡Faulty travel lock adjustment
¡Add grease.
Refer to page 130.
¡Adjust or replace. (Request
at a sales or service outlet.)
Hoe attachment,
auxiliary hydraulics,
slewing or traveling
operation not possible
¡Lower the safety lock lever.
Refer to page 49.
¡Replace the fuse.
Refer to page 140.
¡Adjustment. (Request at a
sales or service outlet.)
Digging force is
insufficient
¡Insufficient hydraulic oil level
¡Hydraulic oil is not heated
¡Air cleaner is clogged
¡Hydraulic oil is not of
suitable type
¡Replenish to the prescribed
level.
Refer to page 105.
¡Perform the warm-up
procedure.
Refer to page 66.
¡Clean the air cleaner.
Refer to page 117.
¡Replace the hydraulic oil.
Refer to page 123.
Traveling is not possible
or not smooth
¡Stones or foreign objects
are stuck
¡Remove the foreign object.
Machine does not travel
straight forward
¡Stones or foreign objects are
stuck
¡Faulty crawler tension
adjustment
¡Remove the foreign object.
¡Adjust the crawler to the
prescribed tension.
Refer to page 111.
Travel speed cannot be
changed
¡Fuse is blown ¡Replace the fuse.
Refer to page 140.
Slewing is not possible
or not smooth
¡Insufficient grease on slew
bearing
¡Add grease.
Refer to page 112.
¡Insufficient grease on travel
levers, blade lever or pedal
¡Stretched wire