234
OPTIONS
Operating Levers (with Second auxiliary hydraulics) / TB145
Decel. Button
WARNING
Set the operating and travel levers to
neutral before operating the decel. button.
The machine’s operating speed will
change abruptly if the button is operated
while the levers are engaged.
Press the button on the right operating lever
to lower the engine speed to low idling.
Press the button again to return to the engine
speed set with the throttle lever.
Note: The one-touch decelerator is a device
for lowering the engine speed and reducing
fuel consumption when little engine output
is required, for example when the operating
and travel levers are in neutral.
First Auxiliary Hydraulic Buttons
Press those buttons to control the flow of the
oil in the first auxiliary hydraulic lines.
(A) .... Hydraulic oil flows to left auxiliary
line(a)
(B) .... Hydraulic oil flows to right auxiliary
line(b)
¡Proportional control of the auxiliary
hydraulic circuit is not possible.
K3L022
K3L023
A
B
To Next Page
Loading...
Need help?
General
