31
SAFETY
Maintenance Precautions
Have a Takeuchi service agent
repair welding cracks or other
damage
Ask a Takeuchi service agent to repair any
welding problems which are detected. If not
feasible, make sure the welding is done by a
qualified person in a properly equipped
workplace.
Checks after maintenance
¡Gradually raise the engine speed from a
low idle to maximum speed and check that
no oil or water is leaking from serviced
parts.
¡Move the controls and check that the
machine is operating properly.
Disposing of wastes
¡Funnel spent fluids from the machine into
containers. Disposing of fluids improperly
destroys the environment.
¡Follow the prescribed regulations when
disposing of oil, fuel, engine coolant,
refrigerant, solvents, filters, batteries or
other harmful substances.
Handling of the Accumulator
High pressure nitrogen gas is enclosed in
the accumulator and incorrect handling could
possibly bring about serious personal injury
due to explosion. The following matters
should be strictly observed:
¡Do not disassemble.
¡Do not bring close to fire or throw into a
fire.
¡Do not make hole, weld, or fuse.
¡Do not subject to shock such as hitting or
rolling.
¡At time of disposal, it will be necessary to
release the enclosed gas. Please contact
a Takeuchi sales or service outlet.
N0A0051
To Next Page
Loading...
Need help?
General
