TallyGenicom 2248 - Page 100

USING SETUP MODE
User's Manual5-26
MENU1 and
MENU2 Items
Table 5.3 MENU1 and MENU2 Items and Options (Cont.)
NOTES:
• Underlined options are the factory defaults.
• Asterisks identify items and options that differ for the IBM XL24E and
Epson ESC/P2 emulations. The notes are defined at the end of the table.
Options Description
<CR-CODE>
CR ONLY No line feed is added to a carriage
return.
CR & LF A line feed is added to each carriage return.
<LF-CODE> LF ONLY No carriage return is added to a line
(*2) feed.
LF & CR A carriage return is added to each line feed.