3.6 AE (Automatic Exposure)
AE has the following 4 modes, all of which can be set using VISCA Command (CAM_AE
Command). A variety of AE functions are available for optimal output of subjects in
lighting conditions that range from low to high.
- Full Auto
- Shutter Priority
- Iris Priority
- Manual
The motion in each mode is as follows.
AE – Full auto
This mode can be set using Full Auto Command.
Controlling automatically Iris, Gain, and Shutter Speed.
In this mode, users can select Flicker Auto Detect On in which camera module
automatically detects electricity frequency and adjusts the shutter speed in order to
eliminate flickering (or so called banding) and Flicker Auto Detect Off in which camera
module does not detect.
Setting On/Off uses On/Off Command in CAM_FlickerAutoDetect Command. The
default setting is Off.
To Next Page
Loading...