3.36 Initial Settings, Custom Presets
Initial settings for the various functions of the camera module are indicated in the
“Initial Setting” row. It is same meaning of Factory Default.
For “Custom Preset”, use VISCA CUSTOM command to save all parameters except
parameters set by register setting (CAM_RegisterValue Command). When the camera is
powered on, the parameters set by VISCA CUSTOM command, are recalled
automatically.
Parameters except parameters set by Register Setting (CAM_RegisterValue Command)
can be saved.
Reset
Clear the saved data.
Set
Save the current data.
Recall
Read the saved data.
To Next Page
Loading...