3.16 Defog
This function is set using Defog Command.
Defog function is to get better subject recognition at fog environment.
Defog Off Defog On
3.17 Noise Reduction
The NR (Noise Reduction) function removes noise (random noise, etc.) to provide
clearer images. This function is set using CAM_NR Command.
This function has six steps: levels 1 to 5, plus off (0).
The NR effect is applied in proportion to the gain. In bright subjects, the NR effect
difference between levels will become smaller.
3.18 3D Noise Reduction
The 3DNR (3D Noise Reduction) function removes noise (random noise, etc.) to provide
clearer images with focusing on temporal changes of noise. This function is set using
CAM_NR Command.
This function has six steps: levels 1 to 5, plus off (0). It should be aware that higher
level increases afterimage phenomenon against moving subjects.
To Next Page
Loading...