3.24 Color Gain
This can changes color gain (color strength).
This uses Direct Command in CAM_ColorGain Command.
The initial setting 100% (4h) can be set to range from approx. 60% (Oh) to 200% (Eh)
with 15 stages.
3.25 Color Hue
This can change the color hue (color phase).
This uses Direct Command in CAM_Color Hue Command.
The initial setting 0 degrees (7h) is adjustable between approx. -14 degrees (0h) and
+14 degrees (Eh), in 15 increments.
3.26 Effect
This uses Commands in CAM_PictureEffect Command.
It consists of the following functions.
Off
Black & White: Monochrome Image
To Next Page
Loading...