3.27 E-flip and Mirror
This uses Commands in CAM_PictureFlip Command and CAM_LR_Reverse Command.
E-flip
This function reverses the video output from the camera vertically and horizontally.
Mirror
This function reverses the video output from the camera horizontally.
3.28 Freeze
This function captures one frame from the video stream and continuously output the
captured one frame.
CAM_FREEZE Command controls On/Off. At power on, it is always Off.
3.29 Memory
Memory (Position preset)
Using the position preset function, 4 sets (0 to 3) of camera shooting conditions can be
stored and recalled.
This uses Commands in CAM_Memory Command.
Reset
Clear the designated memory.
Set
Save the data to the designated memory.
Recall
Read the data from designated memory.
To Next Page
Loading...