5-8
USER INTERFACE
PH61 Peristaltic Pump
User Interface
5
Use the arrow keys to select the desired week and press
the SEL key. The following screen will display:
Use the arrow keys to select the desired week and press
the SEL key. The screen will return to the OPERATOR
MENU.
Screen D is SYSTEM INFORMATION. The first screen
indicates the software version used in the machine.
Pressing the SEL key a second time will display the
Language screen.
Pressing the SEL key a third time displays the bill of
material (B.O.M.) number and serial number for the
machine. Pressing the SEL key from this screen returns
the display to the OPERATOR MENU.
Screen E is AUTO HEAT TIME. This screen is used to
set the time of day in which the machine will
automatically enter the Heat Treatment cycle. Pressing
the arrow keys moves the cursor, pressing the plus or
minus keys changes the selected digits, and pressing the
SEL key accepts the settings and returns to the
OPERATOR MENU.
Screen F is CURRENT CONDITIONS and SERVINGS
COUNTER. The first screen displays the current viscosity
of the product and the hopper and barrel temperatures.
The last line of the display is the compressor countdown
safety timer. The safety timer prevents the compressor
from running more than 11 minutes (other than during the
Cooling phase of the Heat Treatment cycle).
Press the SEL key once to view the SERVINGS
COUNTER screen. This screen indicates the number of
times the draw switch has closed (number of draws)
since the last brush-cleaning or since the last serving
counter reset. Pressing the SEL key returns the screen to
the OPERATOR MENU.
Note: Draws are counted during the Auto mode of
operation only.
DST END WEEK
1234L
FIRST SUNDAY
LES>------<
SOFTWARE VERSION
PH61 CONTROL UVC2
VERSION XXX
SEL
Language
V1.14roo English 539
SEL
B.O.M. PH6158FAGS
S/N K0000000
SEL
AUTO HEAT TIME
TIME: 12:00 AM
--
<--- ---> +++ --- SEL
VISC HOPPER BARREL
3800 38.5 28.5
TIME C 11:00 11:00
SERVINGS COUNTER
DRAWS
12
SEL
To Next Page
Loading...
Need help?
General
