Editing the Guitar Layer
VL3X – Reference manual (updated 2015-07-16) 113
Tips and tricks for working
with Amp simulation
► On some amplifiers, what is called “PreGain”
and “PostGain” in VL3X is called “Gain” and
“Volume” respectively.
► More PreGain results in more distortion at
high levels. If you want a crunchy or distorted
sound, turn down the PostGain, adjust Pre-
Gain until you reach the amount of distortion
you like, then turn up PostGain until the output
volume is similar to that of other guitar Pre-
sets. You can do this by ear.
► Styles that have “Clean”, “Crunch” etc. in their
names can still be adjusted to have more, less
or no distortion using the PreGain and Post
Gain controls.
To Next Page
Loading...
Need help?
General
