Setup
VL3X – Reference manual (updated 2015-07-16) 153
Input tab
The Input page contains settings for all of the in-
puts in VL3X.
Mic Gain parameter
Use the Mic Gain parameter to adjust the input
level for the Mic input.
If you have completed the Auto-Gain procedure
from the Quick Guide, you likely won’t need to
adjust this.
To adjust the gain manually, do the following.
► Plug in your microphone.
► If you have a condenser microphone, change
Input Type to Condenser.
► Sing at your loudest.
► Turn the Input Gain parameter up until only the
green and yellow LEDs of the Level indicator
light up.
► If you see the red LED light, turn Input Gain
down until the red LED no longer lights.
This is your optimal Input Gain setting.
Input Type parameter
Use the Input Type parameter to select your mi-
crophone type. Choose the one that best match-
es your setup.
The available options are:
Dynamic Mic
E.g. SM58, OM5, MP-70 etc.
Condenser Mic
Activates +48V phantom power. This will tem-
porarily mute the microphone to avoid audible
“pops” over your PA.
MP-75 Mic, MP-76 Mic or E835 FX Mic
Selecting one of these microphone types will en-
able Mic Control. For more information, see “Mic
Control tab”.
Mic Clip Protection parameter
Use the Mic Clip Protection parameter to acti-
vate a circuit that will avoid signal clipping at the
microphone input stage.
To Next Page
Loading...
Need help?
General
