Setup
VL3X – Reference manual (updated 2015-07-16) 165
Tone tab
VL3X is equipped with a voice-optimized Tone
block that applies Compression, EQ, Gating and
a De-esser to the lead voice. The settings for
these components are not stored as part of Pre-
sets, they are applied globally.
We recommend using the “Adaptive” settings for
Compression, EQ, and Gating as a starting point
and only adjust these components of the Tone
block manually if you run into specific issues.
Tone parameter
Use the Tone parameter to switch the Tone block
on or off.
De-ess parameter
Use the De-ess parameter to adjust the amount
of adaptive de-essing (removal of “sss” sounds)
that should be applied to your voice. The default
setting is 50.
To Next Page
Loading...
Need help?
General
