Getting to know VL3X
VL3X – Reference manual (updated 2015-07-16) 42
There’s no place like Home
Using all the features described on the following
pages, you might find yourself deep in some sub-
menu or parameter list. Don’t panic! Just press
the Home button, and you will return to VL3X’s
“Home” screen. The Home screen shows…
► The number of the current Preset.
► The name of the current Preset.
► The effect blocks currently assigned to the
six footswitches labeled µMod, Delay, Reverb,
Hit, Double / Comp and Harmony / Drive on the
currently active Layer (Guitar or Vocal).
For more information on accessing and edit-
ing effect settings, see “Editing the Vocal Lay-
er” and “Editing the Guitar Layer”.
► Backing Track (if assigned) Play/Stop/Pause
indicators next to the preset number.
► “BT” or “SEQ” if a Backing Track is assigned
to the preset.
“SEQ” is shown in place of “BT” when a se-
quence (FX automation) has been recorded.
More more information, see “Backing Track
Sequence Recording (Automation)”.
The Home screen with the Backing Track (“BT”)
indicator
Think of the Preset as a “container” for…
► the vocal/guitar effects settings,
► the Backing Track and
► the performance data that you have recorded.
Accordingly, when you load the Preset, all of
these components are loaded too.
For more information, see “Backing Tracks and
Presets”.
To Next Page
Loading...
