The Looper
VL3X – Reference manual (updated 2015-07-16) 129
Entering and exiting Loop mode
To enter Loop mode, press and hold the Layer
button. The LED of the Layer footswitch will turn
purple, and the screen will display Loop Tracks
and other information.
The loop screen shows a combination of con-
trols, which relate to the six footswitches, and
track “thumbnails” that show you what you have
recorded.
To exit Loop mode and return to the previously
active Layer (Vocal or Guitar), press and hold the
Layer button.
Loop mode activated
To Next Page
Loading...
