The Looper
VL3X – Reference manual (updated 2015-07-16) 125
Loop button parameters
Press the Loop button to access the following
parameters.
Current Slot display
The Current Slot display shows you which Slot
the Looper is currently working with. You can’t
change the slot from here. This is just a reference
so you don’t have to go back to the Looper Layer
to know what Slot you’re on.
Mix Looper to NP parameter
Use the Mix Looper to NP parameter to mix the
audio output from the Looper into the Natu-
ralPlay algorithm.
This is not an individual audio path (like guitar),
but rather is mixed into the existing audio to sup-
plement it. If, for example, you play guitar chords
into the Looper, you could sing a cappella with
the recorded loop part and it would keep Harmo-
ny/HardTune in key.
However, if you play chords on your guitar that
are completely unrelated to the recorded loop
audio, the system may get confused by conflict-
ing information.
To Next Page
Loading...
Need help?
General
