TC-Helicon VL3X User Manual

The Looper
VL3X – Reference manual (updated 2015-07-16) 126
Auto Met On parameter
If you set the Auto Met On parameter to ON, the
Metronome will activate as soon as you press
RECORD.
Auto Met Mute parameter
If you set The Auto Met Mute parameter to ON,
the Metronome will mute when you finish your
first recording on any track.
ODub Decay parameter
Use the Overdub Decay parameter to reduce the
level of any previous loop (per track) when an
Overdub is recorded. This prevents audio level
overloading. Typically 98% is a good setting, but
lower levels will allow you to creatively “morph”
from one loop into something completely dif-
ferent as older overdubs are “pushed down” in
level.

TC-Helicon VL3X Specifications

General

Brand	TC-Helicon
Model	VL3X
Category	Music Equipment
Language	English