Setup
VL3X – Reference manual (updated 2015-07-16) 158
Talk Trim parameter
Use the Talk Trim parameter to adjust the volume
of your lead voice when “Talk/Bypass” mode is
engaged. It’s not uncommon for performers to
want a little bit more or less volume through the
PA when effects are bypassed.
Setting the Talk Trim parameter to OFF allows
you to mute the microphone during TALK/TUN-
ER mode. When used in combination with press-
ing/holding the Preset UP/DN buttons to enter
TALK/TUNER (which mutes the guitar), you can
effectively mute both guitar and vocal output
from VoiceLive3.
This can be used as a “break mode”, if you’re
away from the stage. Aux signals still pass to the
outputs – so you can play “80’s TV Theme Trib-
ute Band Volume 1” while you have a beer.
To Next Page
Loading...
