Setup
VL3X – Reference manual (updated 2015-07-16) 163
Pitchbend Range parameter
Use the Pitchbend range parameter to define the
range that pitch bend information can affect the
current note(s). This value is represented in semi-
tones. The default value is 12 (1 octave).
Split Note parameter
It is possible to define a specific area of your
MIDI keyboard for VL3X to respond to. Use the
Split Note parameter to define a split point. Use
the Split Direction parameter to control whether
notes above or below that note are included.
Parameter settings: C-1 to G9
Split Direction parameter
It is possible to define a specific area of your
keyboard for VL3X to respond to. Use the Split
Note parameter to define a split point. Use the
Split Direction parameter to control whether
notes above or below that note are included.
► Above: Any notes above the Split note are
“listened to” for MIDI note information.
► Below: Any notes below the Split note are “lis-
tened to” for MIDI note information.
To Next Page
Loading...
