Setup
VL3X – Reference manual (updated 2015-07-16) 169
Shape parameter
(Adaptive EQ mode only)
Use the Shape parameter to control the amount
of adaptive equalization applied to your voice.
The default setting is 50.
Warmth parameter
(Adaptive EQ mode only)
Use the Warmth parameter to adjust the charac-
ter of adaptive equalization. When you set it to
On, the equalization will sound warmer.
Low / Mid / High gain parameters
(Manual EQ mode only)
Use the Low, Mid and High Gain parameters to
set the amount of signal boost (gain) or attenu-
ation that should be applied to the low, mid and
high bands of the EQ.
Parameter range: -12 to 12dB.
To Next Page
Loading...
