Getting to know VL3X
VL3X – Reference manual (updated 2015-07-16) 75
VL3X Backing Track audio format
The internal audio file format of VL3X for Backing
Tracks is 16 bit resolution and 48 kHz sampling
rate. If you convert your audio files to this format
directly from the signal source (e.g. your DAW),
you can save up to 60% of the import time.
If your audio files are MP3 files or WAV files with
another resolution or sampling rate, they need to
be converted. When the conversion is done, you
can start using these tracks. This process can
take a while.
Please note that VL3X will NOT show up as a
hard drive when connected to your computer. A
USB flash drive must be used for Backing Track
import.
To Next Page
Loading...
Need help?
General
