TD Move 5000 - Sale (Debit Card)

- 13 -
Sale (debit card)
Use these instructions to process a debit card purchase on the terminal.
1. Tap the Sale icon.
2. Enter the total dollar amount for the sale and press Enter.
3. The customer conirms the dollar amount (Yes or No).
Tips (optional)
4. The customer selects a tip option and presses OK.
5. The customer conirms the total amount (Accept or Change).
Payment method
6. Perform one of the following payment methods: Insert or Tap. The swipe option
will be displayed, but it is not allowed for a debit sale.
Insert card
a) The customer inserts their debit card. Go to step 7.
Tap
a) The customer taps their contactless-enabled debit card on the contactless
card reader. The customer may be required to insert or swipe their card
in some cases. Go to step 10.
Cashback (optional)
7. The customer indicates whether they want cashback (Yes or No).
8. The customer enters or selects the cashback amount and presses OK.
9. The customer accepts the new total (Accept or Change).
Debit surcharge (optional)
10. The customer agrees to the debit surcharge (Yes or No).
Account selection
11. The customer selects which account they want to use (Chq or Sav).
12. The customer enters their PIN and presses OK.
Ifyoudon’tusecashback,youwillnotseestep7,8,or9.
Ifyoudon’tusedebitsurcharge,youwillnotseestep10.
IfthisisaUnionPaytransaction,youwillnotseestep11.
IfthisisaUnionPaytransaction,thecustomermaynotberequiredtoenteraPIN
andcanbypass thisstep.Ifthecustomerbypassesthestep,and the terminal
requestsaPINagain,thenthecustomermustentertheirPIN.