SAFETY INSTRUCTIONS.
ENVIRONMENTAL CONDITIONS
The Genesys power supply series safety approval applies to the following operating conditions:
*Indoor use *Ambient temperature: 0Cto 50 C
*Maximum relative humidity: 90% (no condensation) *Altitude: up to 3000m
*Pollution degree 2
TM
oo
!
Instruction manual symbol. The
instrument will be marked with this
symbol when it is necessary for the
user to referto the instruction
manual.
CAUTIONRisk of Electrical Shock.
Indicates hazardous voltage.
Indicates ground terminal.
Protective Ground Conductor Terminal
Off (Supply)
On (Supply)
Direct Current (DC)
Alternative Current (AC)
Three-PhaseAlternating Current
Standby (Supply)
The WARNING sign denotes a hazard.An attention toaprocedure is called.
Not following procedure correctly could result in personal injury.
AWARNING sign should not be skipped and all indicated conditions must be
fully understood and met.
The CAUTION sign denotes a hazard. An attention toaprocedure is called. Not
following procedure correctly could result in damage to the equipment. Do not proceed
beyond aCAUTION sign until all indicated conditions are fully understood and met.
Do not use this product in environmentswith strong Electromagnetic field, corrosive
gas and conductive materials.
WARNING
CAUTION
CAUTION
3~
-
-
-
~
4
To Next Page
Loading...
