TDK-Lambda Ltd., Industrial Zone P.O.B 500 Karmiel, Israel
DECLARATION OF CONFORMITY
GEN2400W series
We, TDK-Lambda Ltd., located at Haharoshet St. 56 Industrial Zone P.O.B. 500 Karmiel, Israel declare under our sole
responsibility that the GEN2400W series as detailed on the products covered sheet comply with the provisions of
the following European Directive and are eligible to bear the CE mark:
Restriction Of the use of certain Hazardous Substances Directive 2011/65/EU (RoHS2)
Low Voltage Directive 2006/95/EC
EMC Directive 2004/108/EC
Assurance of conformance of the described product with the provisions of the stated EC Directive is given
through compliance to the following standard:
Electrical Safety EN 60950-1:2006+A11+A1+A12
Electromagnetic Compatibility (EMC): EN 55022:2010
EN 55024:2010
EN 61000-3-3:2008
which cover testing to the following standards:
EN 55022:2010 Conducted Emissions Class A
Radiated Emissions Class A
EN 61000-4-2: 2009 ESD AD: 8KV, CD:4KV
EN 61000-4-3: 2006+A1:2008+A2:2010 Radiated Immunity 3V/m
Signal leads: 0.5KV
EN 61000-4-5 :2006 Conductive Surges Common mode: 2KV
Dierential mode: 1KV
EN 61000-4-6 :2007 Conducted Disturbances 3Vrms
EN 61000-4-8 :2010 Immunity to Mag. Field 1A/m
EN 61000-4-11:2004 Voltage Dips
Our European Representative in the EU is TDK-Lambda UK Limited, located at Kingsley Avenue,
llfracombe, Devon, EX34 8ES UK. Further, all products covered by this declaration are manufactured in
accordance with ISO9000:2008 which ensure continued compliance of the products with the requirements
of the Low Voltage Directive.
Name of Authorized Signatory Martin Soulham
Signature of Authorized Signatory
Position of Authorized Signatory European Marketing Director
Date 20
th
March 2012
Date Series rst CE marked
15 May 2008
Place where signed Ilfracombe, Devon, England
GEN2400W series
1. GEN2400W with one phase input 190-240VAC
2. GEN2400W with three phase input 190-240VAC
with rated output 0-8VDC/0-300A up to
0-600VDC/0-4A and total output power equial or less 2400W
3. GEN20-120/R: with reverce air flow, input one phase 190-240VAC, output 0-20VDC, 0-96A
Optional modules:
1. IEEE (GPIB) module
2. Isolated analog (V/I) module
3. LAN module
4. USB module
To Next Page
Loading...
