TDK-Lambda Genesys Series - Page 37

33
[SOURce]:VOLTage:EXTernal:MODE
Parameter
DIG - 0x0000; VOL - 0x0001; RES - 0x0002 as return value.
[SOURce]:CURRent:MODE
Parameter
NONE - 0x0000; LIST - 0x0001; WAVE - 0x0002 as return value.
[SOURce]:CURRent:EXTernal:MODE
Parameter
DIG - 0x0000; VOL - 0x0001; RES - 0x0002 as return value.
SYSTem[:COMMunicate]:BAUDrate?
Return 9600 - 0x0000; 19200 - 0x0001; 38400 - 0x0002; 57600 - 0x0003; 115200 -
0x0004 as return value.
SYSTem[:COMMunicate]:INTerface
Parameter
RS232 - 0x0000; RS485 - 0x0001; LAN - 0x0002; USB - 0x0003; OPT - 0x0004.
SYSTem:ERRor:ENABle
Parameter
To activate, write 0x0001 as parameter.
SYSTem:FRST
Parameter
USB - 0x0001; RS232 - 0x0002; RS485 - 0x0003; LAN - 0x0004; OPT - 0x0005.
SYSTem:PSOK:DELay
Unit mSec. Data is represented in milliseconds. For example: 1 equals 1mSec;
1000 equals 1Sec.
SYSTem:RANGe
Parameter
5 Volts range - 0x0000; 10 Volts range – 0x0001 as return value.
SYSTem:RIN[:LEVel]
Unit mOhms. Data is represented in milliohms. For example: 1 equals 1mohm;
1000 equals 1ohm.
SYSTem:REMote[:STATe]
Parameter
LOC - 0x0000; REM - 0x0001; LLO - 0x0002 as return value.
SYSTem:SENSe[:STATe]
Parameter
LOC - 0x0000; REM - 0x0001 as return value.
SYSTem:SLEW[:STATe]
Parameter
OFF - 0x0000; VOLT - 0x0001; CURR - 0x0002 as return value.
TRIGger[:IMMediate]
Parameter
To activate, write 0x0001 as parameter.