Front Panel
4 TEAC CD-RW User’s Manual
emergency eject mechanism:
If the eject button fails, you can
turn off the
power to the CD-RW drive
and insert a small, thin rod (such as a straightened
paper clip) into the emergency eject mechanism opening and press firmly to
eject the disc.
LED indicators:
The drive features two LED indicator lights on the front
panel. Various operations are indicated as per the following table:
eject button:
Press this button to open or close the disc tray. (Some CD-ROM
titles disable the manual eject button and rely on software commands to eject
the disc. Refer to the documentation for these titles for more information.)
Operation
Right LED Left LED
At tray loading green LED flashes off
At tray eject green LED flashes off
During write/erase off green LED flashes
During audio play green LED flashes off
During seek/data transfer green LED lights off
Caution: Do not attempt to use the emergency eject mechanism when
either the Power or Busy indicator is lit or you may seriously
damage the disc or the CD-RW Drive.
Note: The right LED continues to flash as Windows continuously checks
for a disc inside the CD-RW drive. This flashing is part of normal
operation.
TEAC52x24x52.book Page 4 Thursday, December 19, 2002 3:29 PM
To Next Page
Loading...
