46
ENGLISH
Sleep Timer Setting
The power can be switched off at the desired time.
Press the SLEEP button in the on mode. "SLEEP 90" is
shown on the display and display becomes dark. The
sleep time can be changed by 10 minutes' step. Press the
SLEEP button repeatedly until desired time appears.
SLEEP 90 : The power will be switched off 90 minutes
later.
SLEEP 80 , SLEEP 70 , ...... SLEEP 10, off
<
You can check the remining time by Pressing the
SLEEP button once.
<
To change the preset sleep timer
:Press SLEEP button again while the remaining sleep
timer shown.The display will show the next sleep time.
<
To deactivate the sleep timer
:Press SLEEP button repeatedly until "SLEEP"
disappears.
Trouble Shooting
In case of trouble with the unit, please take the trouble to
look through this chart and see if you can solve the
problem yourself before you call your dealer or TEAC
service center.
Amplifier
No power
e
Check the connection to the AC power supply.
No sound from speakers.
e
Check the connection to the speakers.
e
Adjust the volume.
e
Select proper source.
e
Pull out the headphones’ plug from PHONES jack.
e
If muting is on, press the MUTING button.
The sound is noisy.
e
The unit is too close to a TV set or similar
appliances. Install the unit apart from them, or turn
them off.
To Next Page
Loading...
