EasyManua.ls Logo

Teac CR-L600 - Specifications; Technical Specifications; General Information

Teac CR-L600
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
50
ENGLISH
Specifications
AMPLIFIER section
Output Power.................. 30 W/ch (6 ohms, 0.5 %,1 kHz)
Input Sensitivity.............. 350 mV/47k ohms
Frequency Response..... 20 Hz to 20,000 Hz (+1/-3dB)
TUNER Section
FM Section
Frequency Range........... 87.50 MHz to 108.00 MHz
(50 kHz steps)
Signal-to-Noise Ratio.... 65dB(Mono)
.......................... 60dB(Stereo)
AM Section
Frequency Range........... 522 kHz to 1629 kHz
(9kHz steps)
Signal-to-Noise Ratio.... 35 dB
CD PLAYER Section
Frequency Response ... 20 Hz to 20,000 Hz(±2dB)
Signal-to-Noise Ratio... more than 85dB
Wow and Flutter ........... Unmeasurable
GENERAL
Power Requirements..... 230 V AC, 50 Hz
Power Consumption ...... 40 W
(standby)...... 5 W
Dimension (W x H x D) .. 190 x 104 x 349 mm
Weight .......................... 3.0 kg
Standard Accessories
Remote Control Unit (RC-864) x 1
Batteries (AA, R6, SUM-3) x 2
AM Loop Antenna x 1
FM Lead-type Antenna x 1
Owner's Manual x 1
Warranty Card x 1
<
Design and specifications are subject to change
without notice.
<
Weight and dimensions are approximate.
<
Illustrations may differ slightly from production
models.