11. PROGRAMMING PROCEDURES
■
Title and Contents of Programming Menu
11- 2
■ Title and Contents of Programming Menu
NO. TITLE
MENU
PAGE
ITEM
NO.
CONTENTS Page
1 PLU DATA EDIT 1 0 CHANGE UNIT PRICE 11-4
2 PLU DATA 1 1 PROGRAM/CHANGE/DELETE PLU 11-5
3 INGREDIENT MESSAGE 1 2 PROGRAM/CHANGE INGREDIENT 11-7
4 NUTRITION SETTING 1 3 PROGRAM/CHANGE NUTRITION FACTS TABLE 11-8
5 CONFIRMATION LABEL 1 4 VERIFY THE PROGRAMMING DATA OF PLU 11-12
6 ADDRESS OR MESSAGE SETTING 1 5 PROGRAM MESSAGE/ADDRESS 11-13
7 COMBINATION MESSAGE 1 6 PROGRAM MESSAGE ON DISPLAY AND TIME 11-14
8 SPECIAL INFO. 1 7 PROGRAM SPECIAL INFORMATION 11-16
9 GRADE LINE 1 8 PROGRAM GRADE LINE 11-16
10 SPEED KEY SETTING 1 9 ASSIGN COMMON PLU TO SPECIFIC SPEED KEY 11-17
11 PRT LOCATION 2 0 SELECT LABEL FORMAT AND ADJUST 11-18
12 DATE/TIME SETTING 2 1 PROGRAM DATE/TIME/MACHINE #/STORE CODE 11-20
13 CMT/PL-3 2 2 BACK-UP/LOAD DATA OF PLU/ING/NUTRI./SPEED KEY 11-20
14 IN-LINE/LOCAL 2 3 SET PARAMETERS FOR TMCC 11-23
15 LON SYSTEM 2 4 SET PARAMETERS FOR LON 11-24
16 INITIAL SET 2 5 SET INITIAL PARAMETERS -----
17 BAR CODE FORMAT 2 6 PROGRAM BARCODE FORMAT 11-26
18 TITLE 2 7 PROGRAM/CHANGE TITLE ON DISPLAY/PRINT 11-28
19 LOGO 2 8 SEND/RECEIVE LOGO DATA 11-29
20 IDIOM 2 9 PROGRAM IDIOM 11-30
21 VENDOR 3 0 VENDOR NAME 11-30
22 FREE FORMAT 3 1 PROGRAM FREE FORMAT 11-31
23 LAN SYSTEM (SL-9000N only) 3 2 PROGRAMS PARAMETERS FOR LAN -----
Table 1.
NOTE: Menu No. 16 and 23 are programs for use of dealers. Contact a TOSHIBA TEC
representative if you desire to use them. When you enter one of these menus by
mistake, press [ESC.] key to return to Main Menu.
To Next Page
Loading...
