TEC SL-9000 - 14.10 Date Change Function

14. OPERATING PROCEDURES
14.9 SELECTING PRINT ITEM
14-15
14.10 DATE CHANGE
The date can be changed temporarily.
Menu: REG., M.DOWN, or REWRAP
Mode: WEIGH, FIX, or BY COUNT
NOTES: 1. A store code can be printed in place of a “packed on date” and “sell by date” by
changing the initial settings #6-5 and #6-6.
To print a store code, select “packed on date” or “sell by date” as a print item using
the above procedure.
2. The print of “packed on time” with alphabetical code can be selected with the Initial
setting #6-6. (SL-9000N only)
3. Setting data will not be changed by turning the power off, changing the mode or
calling a PLU.
4. The [0] key has no function.
5. Pressing the [C] key allows you to return to the step of selecting the “packed on
date”.
6. The range of idle time=0 to 99 seconds. A setting “0” prohibits display of an auto
message.
7. Item 29 is operable only when the initial setting #1-5 is set to “0”.
8. Be sure to press the [FEED]key after the [PRT/*] key when changing the label
format.
Press:
1
2
NOTE: The scale will check the details of the date input. An invalid date will result in an
error.
1
8
9
4
Enter the new date.
(Ex. Dec. 18, 1994)
Day
Year
Month
DATE121894
PRT
*
DT/TM