TEC SL-9000 - 11.8 Special Information Entry; 11.9 Grade Line Configuration

11. PROGRAMMING PROCEDURES
11.8 SPECIAL INFORMATION
11-16
11.8 SPECIAL INFORMATION
Menu Page: 1
Item No.: 7
When the Net Weight Statement label is selected, 3 lines (32 characters/line) of special information can be
printed in the label position where the net weight data is to be printed. The special information can be printed in
the weigh and By Count mode. In the Fix mode, the net weight data is printed.
11.9 GRADE LINE
Menu Page: 1
Item No.: 8
You can set the maximum 49 kinds of grade lines (max. 32 characters/line), and call one of them to print it on the
label.
NOTES: 1. Print position of grade line can be changed by initial setting.
2. Refer to page 11-3, for information regarding how to enter the Grade Line.
7
<MENU>
Page 1
Enter the special
information.
(Refer to page 11-3.)
TEST
ENTER
PROG.
ESC.
<MENU>
Page 1
Main
<MENU>
ENTER
8
<MENU>
Page 1
Enter the grade
line#. (1
〜
49)
ESC.
<MENU>
Page 1
Main
<MENU>
ENTER
Enter characters.
(max. 32 chars./line)
(Refer to NOTE 2)
ENTER
PROG.