TEC SL-9000 User Manual

11. PROGRAMMING PROCEDURES
11.19 IDIOM SETTING
11-30
g Table 6: Error message during data transmission
11.19 IDIOM SETTING
Menu Page: 2
Item No.: 9
Up to 50 terms frequently appearing in ingredient messages can be preset using the following
procedure. The idiom number must be set from 1 to 50 in order. One idiom can contain a maximum
of 20 characters.
Error position
Error message Cause
Header text Data text
Timeout ○ ○
Incorrect segment ○ ○
Incorrect logo size ○
Incorrect number of logos ○
Incorrect logo number ○
Incorrect number of dots to be printed. ○
Parity error ○ ○
Framing error ○ ○
DATA ERROR
Overrun error ○
9
<MENU>
Page 2
<MENU>
Page 2
Main
<MENU>
ENTER
PROG.
ESC.
Set an idiom #.
(#1 - 50)
r
r
Enter an idiom.
(Max. 20 charas.)
ENTER

TEC SL-9000 Specifications

General

Brand	TEC
Model	SL-9000
Category	Scales
Language	English