Techerific DeciVibe - Troubleshooting Call Volume Issues

Troubleshooting, Part 2
The volume of voices in my smartphone call is not correct.
If the caller's voice volume is too soft or too loud you simply need to adjust the volume
on the phone's volume control itself accordingly.
If your voice is too loud turn the AGC (Audio Gain Control/Mic Sensitivity) all the way
down +l and enable Noise Cancellation, you can see how to do both by searching
YouTube for "DeciVibe Audio Gain Control".
If you still encounter issues with your voice being too loud, place the recorder and
phone setup as far away from you as possible in order to decrease your voice volume
even further, and completely unplug the lapel mic from the adapter, so it only picks up
your voice from your smartphone and not the lapel mic. If this works satisfactorily you
may wish to contact us for us to send you a set of earbuds with an extra long cable in
order to make this setup more convenient.
If your voice is too soft, increase the AGC level (see YouTube video above), disable
Noise Cancellation, and bring the lapel mic closer to your voice.
19