Techerific DeciVibe - Language Selection; Tools and Utilities; Auto Record Scheduling

14.5 Language:
Press IJJli,,M to highlight Language and
II to select that menu. Press IJJli,,M to
highlight your desired language and
press II to select it. There are more
than 20 languages available.
14.6 Tools
To access the following menus, please
power on and press IJ]lJ,,M until Set
mode is highlighted and press II to
select it. Press IJJli,,M five times to
highlight Tools, and press II to select
it. Use IJJli,,M and II again as needed to
find and select your desired submenu.
14.6.1 AUTO RECORD
Before setting this option, double-
check your Date and Time settings to
make sure they are correct. Press II
to select Auto Record. Press it again to
45
select Record On/Off. Use IJJli,,M and
II to turn this feature on or off.
Press IJJli,,M once to highlight Auto Record
Cycle and then II to select it. Use IJ]lJ,,M
and II to highlight and select desired
option, Once, Daily, or Weekly.
Use IJJli,,M to highlight Start Time and
press II to select it. Use [ +] and [-] to
adjust the hour, next press IJJli,,M and use
[ +] or [-] to adjust the minutes, next
press IJJli,,M and [ +] or [-] to set it to AM
or PM. Press II to confirm your settings.
Repeat the above steps for setting the
End Time in the menu. Press •
1
three
times to exit and save your password.
Simply keep your DeciVibe powered on
or in Standby over your set auto record
time and it will automatically start and
stop your recording for you at your
specified intervals. (See pg 46)