w w w . t e c h n i c o l o r . c o m / m c s
In the DHCP settings tab, enter the filename of the application image in the ‘Boot File’ field
and click OK.
Next make sure that the DHCP option is checked in the ‘GLOBAL’ tab and hit OK. The
Tftpd32 application will need to be restarted after making these changes.
Refer to Figure 80 below.
Once the BOOTP option is enabled the next reboot of the COM46 whose image has been erased
should cause it to download a valid image, reprogram itself, and reboot.
Figure 80 - Enabling TFTP BOOTP Server
To Next Page
Loading...
Need help?
General