EasyManua.ls Logo

Technicolor COM2000 - COM46 Informational Status; Figure 24 - Info Section of the Advanced Edit Page

Technicolor COM2000
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
w w w . t e c h n i c o l o r . c o m / m c s
Page 42
7.6 COM46 Informational Status
The information shown in Figure 24 below is one of the subsections available on the Advanced
Edit page.
Figure 24 - "Info" Section of the Advanced Edit Page
This section provides a selection of many key indicators to the operation of the COM46 card. It
acts as a concise index to the characteristics of each individual COM46 card according to its
status and user-defined settings.
Following is a brief explanation of each field shown above:
Chassis_ID - This field represents which COM360 chassis the card resides in when there are
multiple chassis in the system.
Slot_ID - This field identifies the card’s location within a chassis, numbered 1 through 6.
Tuner - This field identifies the tuner’s location on the COM46 card (1 through 8).
Card_IP - This field shows the IP address of the COM46 card you are currently interacting
with.
Receiver ID - This field reports the DIRECTV Receiver ID, or RID. This value is the first of
two parameters required to obtain authorization on the DIRECTV network.
CAM_ID - This field reports the DIRECTV CAM ID. This value is the second of the two
parameters required to obtain authorization on the DIRECTV network.
Network_ID - This field displays the DIRECTV network of the currently tuned channel. This
number correlates to a specific satellite, and can be used in conjunction with the Frequency
Index” field below to determine whether the card is locked to the correct channel.

Table of Contents