w w w . t e c h n i c o l o r . c o m / m c s
7.21 SysInfo
By clicking the SysInfo hyperlink at the top of any COM2000 web interface page, you will access
the page shown below. This table gives you the ability to identify a number of different unique
identifiers for every COM46 card as well as to identify which card in the chassis, if any, has been
assigned the generation of the Electronic Program Guide (EPG.)
Figure 42 - COM46 Sys Info Page
Following is a detailed list of the information available on the SysInfo (System Info) page.
Chassis - This field reports a unique identifier for the chassis. In systems that contain
multiple chassis, this can be used to identify each card in the system.
Slot – This field identifies the card’s location within a chassis, numbered 1 through 6.CardIP _
his field shows the IP address of the COM46 card that resides in the chassis and slot combination
to its left.
EPG
This field shows whether the card identified is generating EPG data.
MAC_Address
This value is loaded during the manufacturing process and is unique to every COM46 card. Every
IP-enabled device contains a similar address, which is used to ensure that all Ethernet traffic is
routed to the correct destinations.
To Next Page
Loading...
Need help?
General