79
3 Press [SETUP].
4 Press [
], [ ] repeatedly to select “F/W
Update” and then press [OK].
5 Press [
], [ ] to select “USB Front” and
then press [OK].
6 Press [
], [ ] to select “Yes” and then
press [OK].
• The progress is displayed as “Updating %”
while updating. (“ ” stands for a number.)
• When the update has finished successfully,
“Success” is displayed.
7 Press [ ] on the unit to turn this unit
off and on.
Note
• Downloading may take longer depending on the
USB flash memory.
To Next Page
Loading...
