Technics SL-P1300 User Manual

From this page onward the following basic operations are omitted:
*Power on/ofl *Disc compartment open/close *Interrupting play *Stopping play
Time aCCeSS play (To play a disc from a specific starting time)
I
There are two ways to initiate play from a specific starting time:
t. When you already know the starting time (Time Access Play).
2. When you determine the starting point during play or search operation (Cue Point Play).
1. To specify starting time
I
1
Press the numeric button(s) to specify the
track.
The selected number appears in the track
s?ction of the display.
/.:.‘.
2
Press the asterisk button.
The cue point memory indicator illuminates.
Separates track from minutes
:.....I
3
Press the numeric button(s) to specify the
minutes.
The selected number of minutes appears
in the time display section. -+
v,
4
Press the asterisk button.
Separates minutes from seconds
5 Press the numeric button(s) to specify the
seconds.
The selected number of seconds appears
In the tlmedisplaysection. v8-
,
6 Press the asterisk button.
Separates whole seconds
from tenths of a second
7
Press the numeric button to specify tenths
of a second (0.1 second).
The selected number of tenths of a seconds appears
in the time display section. -+
8 Press the play button.
Play begins from the specified Starting time. After the last track
has been played. the unit switches to the stop mode.
The cue point memory indicator goes out.
-IS-

Technics SL-P1300 Specifications

Power

power supply	AC 60 Hz, 120 V (+5%)
power consumption	35 W
output voltage unbalanced	Nominal 2.5 V (EIAJ)

Audio

frequency response	2-20, 000 Hz+0.2dB
dynamic range	More than 100 dB (EIAJ)
S/N ratio	More than 112 dB (EIAJ)

Weight and Dimensions

dimensions	43x38x16.8 cm
weight	16 kg
remote control dimensions	7.3x18.1x2.2 cm