Technics SL-P1300 User Manual

Search play
(Search play can be performed when the player is In the play or pause mode.)
*This function allows search to any desired point on the disc.
*Search play can be performed by using either the forward and backward rockingisearch buttons 0 or the search dial 0.
*For more accuracy, put the unit into the
pause mode before initiating the search operation.
0 Search play using the forward and
Depending on how these buttons are pressed, search wth three
different speeds is possible.
1) Press one of these buttons momentarily to
move the pickup by one pit-track (one disc
rotation). This allows very fine rocking
search.
2) When one of these buttons is held down, the
pickup moves slowly at first.
3) When one of these buttons is held down for
more than about 3 seconds, the pickup
moves rapidly.
*Release the button when the desired point has been reached
(as shown by the display).
*If these buttons are pressed during play, sound can be heard
during the search operation.
During steps 2 and 3. the output level is decreased by -12 dB
(l/4) compared with the normal level.
About rocking search
When two or more CD players are used at a time, as ofien
happens in a studio for example, fade-in and fade-out of
the units have to be timed exactly. The rocking search
function is useful for this because it permits movement of
the pickup across one pit-track (at inner diameter in about
0.13 second) each time either button is pressed momen-
t.Wy.
I@ Search play using the search dial
(Dial search)
1
Press the dial search button “on”.
The dial search indicator illumxntes.
The dial search speed Indicator for “slow” or “fas1” Muminates
also.
2
Press the dial search speed selector to
change the selected search speed.
*Dial search can be performed at two different speeds (slow and
fast) dependmg on the position 1 or 1 of the dial search speed
selector.
3
Turn the search dial.
*If the search dial is turned clockwise, the pickup performs
forward search, and If it is turned counterclockwise, the pickup
performs backward search.
*Usually no sound can be heard while the unit is in the pause
mode. However, if the dial search button is in the “on” position.
sound can also be heard during the pause mode.
*Perform search by continuing to rotate the search dial while
watching the display panel or listening to the sound from the
disc.
The sound level is not reduced during dial search.
Notes:
*The search speed changes according to the speed at which the
search dial is turned. However, you cannot force the pickup to
search faster or slower than its predetermined limits.
*When dial search is performed with the unit in the play mode.
the normal play speed of the pickup is added to (forward
search) or subtracted from (backward search) the dial search
speed.
4 Press the dial search button again to stop
the dial search.
-2o-

Technics SL-P1300 Specifications

Power

power supply	AC 60 Hz, 120 V (+5%)
power consumption	35 W
output voltage unbalanced	Nominal 2.5 V (EIAJ)

Audio

frequency response	2-20, 000 Hz+0.2dB
dynamic range	More than 100 dB (EIAJ)
S/N ratio	More than 112 dB (EIAJ)

Weight and Dimensions

dimensions	43x38x16.8 cm
weight	16 kg
remote control dimensions	7.3x18.1x2.2 cm